Air-AP-6500 is an 11ac Wi-Fi standard Qualcomm Chipset high power 3*3 MIMO industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0.Combined 2200Mbps Wi-Fi speed over 3 radios: 2.4GHz(400Mbps)+5GHz(900Mbps)+5GHz(900Mbps), equipped Gigabit WAN & LAN port, fast Ethernet data rate make more than 200 end users can access into Air-AP-6500 with faster speed, make them enjoy seamless HD movies, streaming, online gaming, wireless security, and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall…
AirPro AIR-AP-6500, 2200Mbps WAVE2 11ac Ceiling Mount AP
AirPro AIR-AP-6500, 2200Mbps WAVE2 11ac Ceiling Mount AP
- Comply with IEEE 802.11ac/b/g/n, tri-band, 2200Mbps Data Rate.
- 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port, Gigabit Ethernet.
- 500mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage, 32M Flash, 512M DDR3 RAM, more user, more stable.
- Support active IEEE 802.3at 48V PoE standard.
- Support SSID broadcasting, Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz).
- Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode.
- With function of build in firewall, IP filter, URL filter and MAC filter.
- Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment.
- Support DDNS, VPN pass through, Port forwarding and DMZ host.
- Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security.
General Details
What This Product Does
Key Features:
HIGH POWER FOR MORE RANGE AND STABLE SIGNAL
- Designed in Power Amplifier on PCB board, the power can be 500mW high power, 5dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable Wi-Fi signal for users.
METAL CASE, PERFECT HEAT DISSIPATION TO EXTEND THE WORKING LIFE
- The bottom shell with metal shell improved the heat dissipation function, make it work as normal in -30°C to 70°C, extend the device working life.
MU-MIMO, WAVE 2.0 TECHNOLOGY
- With Wave 2 technology, it adopts 256QAM modulation, supports MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Streams, greatly to improve communication efficiency.
POWER OVER ETHERNET AND DC POWER AVAILABLE
- Air Canopus has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost.
- What’s more, it supports DC input if need, So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
ACCESS CONTROLLER SYSTEM
- With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup, and restore.
- What’s more, the AC controller with a local authentication function.
- Besides that, the administrator can remotely manage the AC controller or wireless AP at any place/time, simple and cost-saving in maintenance.
Specifications
Technical Specifications
Hardware: | |||||
---|---|---|---|---|---|
Chipset | Qualcomm IPQ4019+QCA9886+QCA8075 | ||||
Standard | 802.11ac/b/g/n, MIMO technology | ||||
Memory | 512MB DDR3 RAM | ||||
Flash | 32MB | ||||
Interface | 1 * 10/100 /1000Mbps RJ45 WAN Port | ||||
1 * 10/100 / 1000Mbps RJ45 LAN Port | |||||
1 * Reset button, press 10 seconds to revert to the default setting | |||||
Antenna | Built-in 5dBi MIMO Antenna | ||||
Power consumption | 48V PoE<30W | ||||
Size | 198mm X 32mm |
RF Data | |||||
---|---|---|---|---|---|
Frequency | 2.4G:802.11b/g/n: 2.4GHz – 2.484GHz | ||||
5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz | |||||
Country code | FCC、IC、ETSI、MKK、MKK1、MKK2、MKK3、NCC、RUSSIAN、CN | ||||
Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM | ||||
DSSS = DBPSK, DQPSK, CCK | |||||
Throughput | 2200Mbps | ||||
2.4G RF Power (IPQ4019) | 802.11b | 11M | 23±2dBm | 1M | 25±2dBm |
802.11g | 54M | 22±2dBm | 6M | 24±2dBm | |
802.11n HT20 | MCS7 | 21±2dBm | MCS0 | 23±2dBm | |
802.11n HT40 | MCS7 | 21±2dBm | MCS0 | 23±2dBm | |
5G RF Power
(IPQ4019) |
802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm | |
5G RF Power
(QCA9886) |
802.11a | 54M | 19±2dBm | 6M | 21±2dBm |
802.11n HT20 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
802.11n HT40 | MCS7 | 18±2dBm | MCS0 | 20±2dBm | |
802.11ac HT80 | MCS9 | 17±2dBm | MCS0 | 19±2dBm | |
2.4G Receive Sensitivity | 802.11b | 11M | -85dBm | 1M | -94dBm |
802.11g | 54M | -72dBm | 6M | -90dBm | |
802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
5G Receive Sensitivity | 802.11a | 54M | -72dBm | 6M | -90dBm |
802.11n HT20 | MCS7 | -70dBm | MCS0 | -88dBm | |
802.11n HT40 | MCS7 | -68dBm | MCS0 | -86dBm | |
802.11ac HT80 | MCS9 | -58dBm | MCS0 | -85dBm | |
EVM | 2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB
5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB |
||||
PPM | ±20ppm | ||||
Max Users | 256 | ||||
Firmware Features: | |||||
Operation mode | Wireless AP, Gateway, WISP, Wi-Fi Repeater | ||||
WAN Type | Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access) | ||||
Wireless Security | 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption | ||||
SSID | Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G) | ||||
Firewall | DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding |
||||
Protocols | IPv4 |
Others: | |||||
---|---|---|---|---|---|
Package Contents | 2200Mbps Tri-Band wireless access point 4*4 MIMO
Ethernet Cable Quick Installation Guide Setting Accessory |
||||
System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX, or Linux | ||||
Environment | Operating Temperature: -20~55 ℃
Limit working temperature: -30~70 ℃ Storage Temperature: -40~70 ℃ Humidity: 5%~95% non-condensing |
||||
Management | Firmware GUI, Remote Management, WLAN Controller, Cloud Management System |
Download