en English

AirPro XDS6500 500mW, 2200Mbps Ceiling Mount AP

AirPro XDS6500 500mW, 2200Mbps Ceiling Mount AP

  • Comply with IEEE 802.11ac/b/g/n, tri-band, 2200Mbps Data Rate.
  • 1*10/100/1000Mbps WAN Port, 1*10/100/1000Mbps LAN Port, Gigabit Ethernet.
  • 500mW high power, build in 5dBi MIMO antenna, stronger signal strength, more wireless coverage, 32M Flash, 512M DDR3 RAM, more user, more stable.
  • Support active IEEE 802.3at 48V PoE standard.
  • Support SSID broadcasting, Multi SSID up to 12 (4 SSID in 2.4GHz, 8 SSID in 5GHz).
  • Support Gateway (PPPOE, static IP, dynamic IP) , Wireless AP, Repeater, WISP operation mode.
  • With function of build in firewall, IP filter, URL filter and MAC filter.
  • Comply with IEEE 802.3az standard, RF power adjustment and frequency analyzer for better application in different environment.
  • Support DDNS, VPN pass through, Port forwarding and DMZ host.
  • Support 64/128-bit WEP security, EAP, 128bit WPA (TKIP/AES) security.

SKU: XDS6500 Category:
General Details

What This Product Does

XDS6500 is an 11ac Wi-Fi standard Qualcomm Chipset high power industrial Ceiling Wireless Access Point support MU-MIMO, Wave2.0.Combined 2200Mbps Wi-Fi speed over 3 radios: 2.4GHz(400Mbps)+5GHz(900Mbps)+5GHz(900Mbps), equipped Gigabit WAN & LAN port, fast Ethernet data rate make more than 200 end users can access into XD6500 with faster speed, make them to enjoy seamless HD movies, streaming, online gaming, wireless security and other bandwidth-intensive tasks, widely be used in school, hospital, hotel, office, shipping mall…

HIGH POWER FOR MORE RANGE AND STABLE SIGNAL:

Designed in Power Amplifier on PCB board, the power can be 500mW high power, 5dBi MIMO high gain antenna, together with Ceiling mount, greatly increase the wireless range and supply the stable Wi-Fi signal for users.

METAL CASE, PERFECT HEAT DISSIPATION TO EXTEND THE WORKING LIFE:

The bottom shell with metal shell, improved the heat dissipation function, make it work as normal in -30°C to 70°C, extend the device working life.

WAVE 2 TECHNOLOGY:

With Wave 2 Technology, it adopt 256QAM modulation, support MU-MIMO (Multi-User Multiple-Input Multiple-Output), 8 Spatial Steams, greatly to improve the communication efficiency.

POWER OVER ETHERNET AND DC POWER AVAILABLE:

XDS6500 has integrated IEEE802.3at Power over Ethernet (PoE), for easy installation and lower cost. What’s more, it support DC input if need, So it can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.

ACCESS CONTROLLER SYSTEM & CLOUD MANAGEMENT SYSTEM:

With Access Control System, plug and play, zero configure the AP’s IP address, ESSID, Channel, Password, upgrade firmware, backup and restore. What’s more, the AC controller with local authentication function, easy to do advertisement and captive portal authentication like Member/WeChat/SMS login. Besides that, administrator can remote manage the AC controller or wireless AP at any place/time, simple and cost save in maintenance.

Specifications
Hardware:
Chipset Qualcomm IPQ4019+QCA9886+QCA8075
Standard 802.11ac/b/g/n, MIMO technology
Memory 512MB DDR3 RAM
Flash 32MB
Interface 1 * 10/100 /1000Mbps RJ45 WAN Port
1 * 10/100 / 1000Mbps RJ45 LAN Port
1 * Reset button, press 10 seconds to revert to default setting
Antenna Build in 5dBi MIMO Antenna
Power consumption 48V PoE<30W
Size 198mm X 32mm
RF Data
 

 

Frequency

2.4G:802.11b/g/n: 2.4GHz – 2.484GHz
5GHz:802.11a/n/ac MIMO: 5.150GHz~5.850GHz
Country code FCC、IC、ETSI、MKK、MKK1、MKK2、MKK3、NCC、RUSSIAN、CN
Modulation OFDM = BPSK,QPSK, 16-QAM, 64-QAM, 128-QAM, 256-QAM
DSSS = DBPSK, DQPSK, CCK
Throughput 2200Mbps
2.4G RF Power (IPQ4019) 802.11b 11M 23±2dBm 1M 25±2dBm
802.11g 54M 22±2dBm 6M 24±2dBm
802.11n HT20 MCS7 21±2dBm MCS0 23±2dBm
802.11n HT40 MCS7 21±2dBm MCS0 23±2dBm
5G RF Power

(IPQ4019)

802.11a 54M 19±2dBm 6M 21±2dBm
802.11n HT20 MCS7 18±2dBm MCS0 20±2dBm
802.11n HT40 MCS7 18±2dBm MCS0 20±2dBm
802.11ac HT80 MCS9 17±2dBm MCS0 19±2dBm
5G RF Power

(QCA9886)

802.11a 54M 19±2dBm 6M 21±2dBm
802.11n HT20 MCS7 18±2dBm MCS0 20±2dBm
802.11n HT40 MCS7 18±2dBm MCS0 20±2dBm
802.11ac HT80 MCS9 17±2dBm MCS0 19±2dBm
2.4G Receive Sensitivity 802.11b 11M -85dBm 1M -94dBm
802.11g 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
5G Receive Sensitivity 802.11a 54M -72dBm 6M -90dBm
802.11n HT20 MCS7 -70dBm MCS0 -88dBm
802.11n HT40 MCS7 -68dBm MCS0 -86dBm
802.11ac HT80 MCS9 -58dBm MCS0 -85dBm
EVM 2.4G EVM: 802.11b: ≤-10 dB; 802.11g: ≤-25 dB; 802.11n: ≤-28dB

5G EVM: 802.11a: ≤-25 dB; 802.11n: ≤-28 dB; 802.11ac: ≤-32 dB

PPM ±20ppm
Max Users 256+
Firmware Features:
Operation mode Wireless AP, Gateway, WISP, Wi-Fi Repeater
WAN Type Dynamic IP/Static IP/PPPoE/L2TP(Dual Access) /PPTP(Dual Access)
Wireless Security 64/128-bit WEP, WPA / WPA2, WPA-PSK/ WPA2-PSK encryption
SSID Multiple SSID (4 SSID for 2.4G, 8 SSID for 5.8G)
Firewall DoS, SPI Firewall, IP Address Filter/MAC Address Filter/Domain Filter
IP and MAC Address Binding
Protocols IPv4
Others:
Package Contents 2200Mbps Tri-Band wireless access point

Ethernet Cable

Quick Installation Guide

Setting Accessory

System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, Windows 8, MAC OS, NetWare, UNIX or Linux
Environment Operating Temperature: -20~55 ℃

Limit working temperature: -30~70 ℃

Storage Temperature: -40~70 ℃

Humidity: 5%~95% non-condensing

Management Firmware GUI, Remote Management, WLAN Controller, Cloud Management System
Profile
Air Pro Technology Inc. was established in 2006 by a group of highly motivated individuals having a rich experience in providing high class networking solutions. Air Pro has its in-house R&D unit which specializes in design, development and customization of wired and wireless solutions, esp. for large scale Telecom industries. Air Pro has built its credibility over the last 8 years with its best-in-class quality products which have high performance and extremely user-friendly.