AP-EGS4128, 24-port GbE Managment Switch + 4 GbE Uplink Port Switch

  • Support 24*RJ45 ports + 4*RJ45/SFP combo ports
  • Support Web UI for configuration
  • Support Console port with CLI command

SKU: AP-EGS4128 Category:
Specifications

Hardware spec

Items Specifications
Model No. AP-EGS4128
Key Components 1.    RTL8382M+RTL8218Bx2+RTL8214FC

2.    Flash IC: MXIC 16M Byte

I/O ports 24x GbE ports, RJ45

4 x GbE combo ports, RJ45 + SFP

Reset Button: reset to default setting, re-start system

RJ45 Console port

LED Define PWR: Green LED

–     Off: power off or fail

–     On: power on

SYS: Green LED

–     Off: power off or fail

–     On: system is ready

–     Blinking: system booting up

Alert: Red LED (option)

–     Off: Switch is normal condition

–     On: Alarm for system failure because of overheat, wrong voltage.

Port LED:

Link/ACT:

–            Off: port disconnected or link fail

–           Green on: 1000Mbps connected

–           Amber on: 10/100Mbps connected

–           Blinking: sending or receiving data

4 Combo port LED:

RJ45:

– Off: disconnected or fail

– Green: 1000Mbps connected

– Amber: 10/100Mbps connected

– Blinking: data transmitting

SFP:

– Off: disconnected or fail

– Green: 1000Mbps connected

– Amber: 100Mbps connected

– Blinking: data transmitting

HW feature IEEE802.3 10BASE-T

IEEE802.3u 100BASE-TX

IEEE802.3ab 1000BASE-T

IEEE802.3az EEE

IEEE802.3at, IEEE802.3af

MAC address Table:8K

Packet buffer size:4.1M

Jumbo Frame:9K bytes

Dying Gasp System support Dying Gasp for HW detection.

1.    Default set voltage is 10.6VDC.

2.    HW can be flexible tuning Dying Gasp Voltage.

System Monitor

(Option)

HW Monitor IC: ADT7463

l  Voltage Monitor

n  Input Voltage : 12V (+/-7% Alarm Threshold)

n  I/O Voltage : 3.3V (+/- 5% Alarm Threshold)

n  DDR Voltage : 1.5V (+/- 5% Alarm Threshold)

n  PHY Voltage : 1.1V (+/- 5% Alarm Threshold)

n  MAC Voltage:1.0V (+/- 5% Alarm Threshold)

l  Temperature Monitor

n  BOARD: 0~80°C

n  MAC: 0~85°C

n  PHY: 0~85°C

Power Input Internal power supply

Input: 90~264VAC/47~63Hz

Output: 12V/3A

Reset button Support reset to default configuration
Dimension 441(W) x 196(D) x 44(H) mm
FAN Design Fan-less
Temperature Operating: 0 ~ 50℃

Storage : -40 ~ 70℃

Humidity Operating: 10% ~ 90% RH (non-condensing)

Storage : 5% ~ 90% RH (non-condensing)

Software Features

Software Features

Model Model WEB Smart L2 Switch
Network DHCP Client Yes Yes
DHCPV6 Client Yes Yes
SNTP Yes Yes
Link Aggregation LACP Link groups 8 8
LACP Load balance Yes Yes
Static Trunk 8 8
Port Port Configuration Yes Yes
EEE Yes Yes
Jumbo Frame Yes Yes
VLAN IEEE802.1Q VLAN Yes Yes
VLAN Groups 256 256
Voice VLAN Yes Yes
Protocol VLAN No Yes
MAC VLAN No Yes
Surveillance VLAN Yes Yes
Spanning Tree 802.1d (STP) Yes Yes
802.1w (RSTP) Yes Yes
802.1s (MSTP) No Yes
LLDP LLDP Yes Yes
LLDP-MED Yes Yes
Multicast IGMP Snooping v1/v2/v3 Yes(No V3) Yes
IGMP Snooping Queries Yes Yes
Block unknown multicast trafic Yes Yes
Multicast groups 256 256
MLD Snooping v1/v2 Yes Yes
Multicast VLAN registration (MVR) No Yes
Authentication RADIUS Yes Yes
TACACS+ Yes Yes
Management VLAN No Yes
Management ACL No Yes
802.1x Yes Yes
MAC-Based No Yes
WEB-Based No Yes
Guest VLAN No Yes
Security Port Security Yes Yes
Storm Control Yes Yes
DoS Yes Yes
Dynamic ARP Inspection Yes Yes
DHCP Snooping Yes Yes
IP Source Guard Yes Yes
ACL MAC ACL Yes Yes
IPV4 ACL Yes Yes
IPV6 ACL Yes Yes
QoS Port-based QoS No No
IEEE802.1p QoS Yes Yes
IP Precedence based CoS Yes Yes
DSCP based CoS Yes Yes
Priority Queues 8 8
Scheduling Algorithm SP+WRR SP+WRR
Rate Limiting Ingress rate limiting Yes Yes
Egress rate limiting Yes Yes
Mirror Port Mirroring on ingress and egress Yes Yes
Many to One Yes Yes
Log System Log Yes Yes
Logging Server No Yes
  Diagnostics Ping No Yes
Traceroute No Yes
Cable Test No Yes
Fiber Module Information No Yes
UDLD No Yes
Management User Account Yes Yes
WEB UI Yes Yes
CLI No Yes
Telnet Yes Yes
Firmware upgrade by WEB UI Yes Yes
Firmware upgrade by TFTP Yes Yes
Dual Image No Yes
config upload/download by WEB UI Yes Yes
SNMP V1/V2/V3 Yes Yes
SNMP Trap Yes Yes
RMON Yes Yes
Loop Detection/Prevention Loop detection No No
Loop prevention Yes Yes
Profile
Air Pro Technology Inc. was established in 2006 by a group of highly motivated individuals having a rich experience in providing high class networking solutions. Air Pro has its in-house R&D unit which specializes in design, development and customization of wired and wireless solutions, esp. for large scale Telecom industries. Air Pro has built its credibility over the last 8 years with its best-in-class quality products which have high performance and extremely user-friendly.